Sudo fcli set bgp connection_to_my_router remote_address 192.168.1.188 Sudo fcli set bgp connection_to_my_router local_address 192.168.1.134 Sudo fcli set bgp connection_to_my_router remote_asn 65001 Sudo fcli set bgp connection_to_my_router local_asn 65001 Sudo fcli set bgp connection_to_my_router You need to look on “state=…” it should be “Established” for a properly configured BGP session.Īs next step, we need to configure FastNetMon’s BGP session (please replace ASN number by your real ASN and replace “192.168.1.188” by IP address of Mikrotik): sudo fcli set main gobgp enable Ttl=255 in-filter='' out-filter='' address-families=ip,ipv6 default-originate=never remove-private-as=no as-override=no passive=no use-bfd=no state=opensent Then check configuration of created peer: /routing bgp peer printĮxample output: Flags: X - disabled, E - establishedĬheck peer status using this command: /routing bgp peer print statusĠ name='peer1' instance=default remote-address=192.168.1.134 remote-as=65001 tcp-md5-key='' nexthop-choice=default multihop=no route-reflect=no hold-time=3m Please replace 192.168.1.134 by address of machine with FastNetMon: /routing bgp peer add remote-address=192.168.1.134 remote-as=65001 address-families=ip,ipv6 Out-filter='' client-to-client-reflection=yes ignore-as-path-len=no routing-table=''Īs next step, we will create peer for FastNetMon which supports IPv4 and IPv6 unicast families. To confirm that it was created correctly, please use this command: /routing bgp instance printĮxample output: Flags: * - default, X - disabledĠ * name='default' as=65001 router-id=0.0.0.0 redistribute-connected=no redistribute-static=no redistribute-rip=no redistribute-ospf=no redistribute-other-bgp=no With 32 bit ASN you will need to follow slightly different steps: /routing bgp instance set default as=65001 redistribute-static=no If you need IPv6 support you need to enable additional package and reboot router after that: /system package enable ipv6Īs first step, you need to create BGP instance, we use private 16 bit ASN in our tests. To start configuration, please establish ssh connection with your device.

In this guide we will provide detailed guide which will help to establish BGP session between FastNetMon and Mikrotik.

Router os7